|
|
 |
For more information,
please contact us:
vicky@china-gisan.com |
|
|
|
|
| Location: Home > News > Text |
Stamping parts precautions
|
|
Edit: Read: 1093 Date: 2017/3/8
|
1. Semi-automatic and manual punch must be equipped with two-hand brake switch, prohibited foot or one hand start switch stamping.
2. After the high punching machine, the normal stamping, turn off the sound box (product 8065 edge check edge packaging except).
3. In continuous stamping, the employee can not take the product in the punch 1 or less.
4. Technician on the transfer machine, only one person debugging, not two people to debug.
5. Technician transfer machine feeding, only in the machine, the distance of not less than 1M.
6. Mold must be locked when the screws, 4 hours to shut down to check whether the screws loose.
7. When the mold in the production process problems do not need unloading, directly on the machine maintenance, you must turn off the injection molding machine power supply and hang on the power box is in the maintenance of signs can be implemented repair mode.
8. All tools used after all returned to the toolbox, can not be placed on the machine, so that the tool slipped to people.
9. When the machine is not in production, cut off the power supply in time.
10. Short work, use a special tool, not directly by hand feeding or picking.
11. The producers should be standing properly and the hands and heads should be kept at a certain distance from the press and keep an eye on the press and keep away from others.
12. When the production operator, repair the model is strictly prohibited to reach into the mold work.
13. When installing the suction fan, the operator does not allow the handle to reach the motor to clean the scrap.
14. Work is strictly prohibited to wear slippers, so as not to workshop mold, iron and so hit the feet. Squad leader, fitter, modifier work must wear labor insurance shoes;
15. male operators are strictly prohibited to stay long hair, female workers long hair to disk up, so as not to long hair involved in the flywheel.
16. white oil, alcohol, cleaning agents and other oils should pay attention to fire.
17. Materials, waste and mold packing with gloves when operating, so as not to scratch the hand.
18. There must be timely clean up the oil, so as not to slip wrestling.
19. Boring and milling machine is strictly prohibited with gloves; in the use of grinding machine with a mask and eye shield, to protect themselves.
20. Attention to drag the mold to prevent falling on the ground (to put the flat car to the lowest to pull the mold).
21. Non-electric workers are prohibited from receiving and repairing machines.
22. Do not blow the wind gun to the people blowing, easy to hurt the eyes.
23. Operators need to bring earplugs.
24. found abnormal machine when the first turn off the power and then find a shift on time technician, can not be handled without authorization.
25. new staff to work the first day, the team leader must explain to him a good safety practices, the first week of a day to learn a safe operating procedures.
26. When adjusting the machine, be sure to adjust the machine to single action, it is strictly forbidden to play with the ribbon.
27. Under the gate can not store any flammable, explosive items.
28. Operators are strictly prohibited in the workshop chase, so as not to wrestling, knock down the product or hit himself.
29. According to the equipment check the contents of the check on the equipment inspection, with particular attention to the punch guide and brake operation is normal, single punch and even red function clear.
30. When installing the mold on the small punch (10T), loosen the locking device of the rail, install the upper and lower molds, and adjust the guide stroke until it meets the requirements and locks the fastening device. Hit a single stroke, locking the mold, the mold in the mold after the lock, the production before making a check. กค
31. Discharge or manual single feeding embryo, you must use a special tool (pliers, hooks), is strictly prohibited to send, take the embryo. Single switch to injury, to double switch. Machine can not leak, otherwise it will fall. Do not expose the power supply.
32. Stamping iron when wearing gloves, the spirit of concentration, or hurt the hand.
33. Work, first check the operation of the equipment with or without abnormal, such as single, even the red is not clear, the operation is not working or electrical failure, to immediately stop the time to find a doctor on duty.
34. Punch press is strictly prohibited to use the foot switch, the original machine with all the demolition.
35. Clean up, check the equipment, you must turn off the power after the operation.
36. cut off the power, clean, scrub the work surface, remove the mold maintenance storage, regular inspection of the lubrication system oil every week. |
|
Prev: numerical control machining
|
|
Next: Stamping parts |
Print |
Close
|
|
|
service
+86-769-82208150
Metal market
